Resource Library

What Can We Learn from Nature for Modern Architecture Structures?

Eric Rusinol, an Architect from The Sagrada Família Foundation, gives us some insight into the project to finish Antoni Gaudí's iconic Cathedral in Barcelona, touching on the teams use of optimization and concept generations technologies from Alta...

Video Testimonials

Additive Manufacturing of a Satellite Antenna Bracket

Analysis and design of a 3D printed antenna support for the Sentinel-1b satellite by RUAG Space with Altair Products.

Video Testimonials

Ping Golf: Using CAE and HPC for Virtual Prototyping

In this short interview Eric Morales, Sr Research Engineer at PING Golf, explains how combining CAE simulation with the latest HPC technology has greatly reduced product development time.

Video Testimonials

Specialized Wins at Le Tour de France with Altair HyperWorks

Learn how Specialized analyzed and improved the aerodynamic performance as well as optimized the weight and structural efficiency of the new S-Works Venge frame.

Video Testimonials

Ford's Thoughts on Relationship with Altair for Lightweighting

John Viera, Global Director, Sustainability and Vehicle Environmental Matters at Ford Motor Company, gives his thoughts on the relationship with Altair and its importance as the company continues to drive down vehicle weight.

Video Testimonials

Ford Research Center - Interview with Dr. Niels Pasligh

Niels Pasligh from Ford Research Center Aachen, Germany, is talking about his team's challenges and how they work with Altair products to tackle these.

Video Testimonials

Speed and Safety- Interview with Luca Pignacca of Dallara Automobili

Manufacturing and supply of Racing Cars, Dallara Automobili uses HyperWorks to help design all of their racing cars.

Video Testimonials

TK Mattingly Discusses Water Landing Simulation of the NASA Orion Crew Module

T.K. Mattingly, former Apollo Astronaut and Director of Space Enterprise for Systems Planing and Analysis, reveals how he worked with Altair ProductDesign to simulate the water landing of the NASA Orion Crew Module.

Video Testimonials

Socomec & Altair SmartWorks - Delivering Leading-Edge IoT Solutions

France-based Socomec’s specialty is providing low-voltage energy installations, from equipment to monitoring, where energy is critical – robust and ultra-reliable solutions for buildings like datacenters, solar plants, utilities, and hospitals. Us...

Video Testimonials

Showcase Video Chiastek

4-minute video introduction showcasing CosiMate as a platform for modeling and visualization, analysis and optimization in the automotive and aerospace industry.

Video Testimonials

ICAT Meets Automotive Safety and Regulatory Requirements with Altair Simulation Software

ICAT is one of the leading centres for testing, R&D, design, development and validation in support of a Government of India funded initiative to develop facilities for automotive testing & development. To meet the challenges of the automotive ind...

Video Testimonials

A Motivating, Inspirational Forum for Learning: Thoughts from Attendees at the 2018 Global ATC

Thoughts from attendees express the energy and passion emanating through the exchange of knowledge, information, ideas and stories by technology leaders and industry executives at the 2018 Global Altair Technology Conference.

Video Testimonials

NEVS Uses Simulation Driven Innovation in Car Body Design

Dr. Lars Fredriksson, Business VP – Simulation Driven Innovation at Altair presenting on behalf of NEVS at the 2017 European ATC.

The automotive industry is experiencing ever increasing requirements on new vehicles from all directions. Still, development cycles must be shortened and development c

ATC Presentations, Video Testimonials

Showcase Video: TAITherm

Introductory video to TAITherm from ThermoAnalytics.

Video Testimonials, Videos

Novum: University of Michigan Participates in Solar Car Challenges Around the World

See how Altair's Software is used to get University of Michigan's solar car, Novum, to the next level to compete in the World Solar Challenge in Australia and the American Solar Challenge - crossing an entire continent in both cases just on the po...

Customer Stories, Video Testimonials

Simulating the Powertrain Development Process with AVL

A brief introduction to AVL, their three products available through the APA, and how they are applied to the powertrain development process.

Video Testimonials, Videos

Improving Composite Design and Simulation Efficiency with Multiscale Designer

Dr. Jan-Philipp Fuhr - Managing Partner, Cikoni talks about developing a methodology to analyze and predict composite matrix and fiber failure using Altair OptiStruct and Multiscale Designer resulting in improved accuracy and simulation efficiency...

Customer Stories, Video Testimonials

Design Lightweight and Efficient Stamping Dies with Topology Optmization

Ford Otosan in Turkey designs big stamping dies with the help of topology optimization using OptiStruct. Weight savings of 20% were possible on their first attempt to try optimization on a new stamping part.

Video Testimonials

Designing Optimized Aluminum Castings with Fatigue Life Considerations

Andras Tanos, R&D Engineer at FemAlk ZRT, talks about how they have used Altair solutions for topology optimization of an engine part.

Video Testimonials, Videos

Innovate Philippines' AEC Landscape with Inspire

Tony Pimentel from Pimentel & Associates is innovating the Philippines Architecture, Engineering and Construction landscape with Inspire.

Video Testimonials, Videos

Alpla Develops Innovative Packaging Solutions with HyperWorks

Alpla develops and produces packaging solutions for consumer goods. Christoph Plankel, Head of Modeling and Simulation Department at Alphla, discusses how they have used simulation to produce lighter packaging without compromising on performance.

Customer Stories, Video Testimonials

Innovative Use of Composites for Organic Architecture

In this interview recorded at JEC World 2018, Atanas Zhelev, Chief Architect and co-founder at Digital Architects Ltd., talks about the innovative use of composites for organic architecture.

Composites offer designers the ability to create a material and engineer its properties to resist particul

Video Testimonials, Videos

Efficient Electromagnetic Actuator Prototype Design with Flux

Bitron is an automotive company producing mechatronic devices, such as actuators, sensors and switches. Siska Verhamme and Pablo Avarez, both Engineers at Bitron, describe their challenges and how Flux can help them, to accelerate the design proce...

Video Testimonials

HPCwire Interview at SC'16

Watch to learn about the open source project and new products being added to the PBS Works suite.

Video Testimonials

Cal Poly Pomona Uses HyperWorks to Design a Winning Formula SAE Racecar

Cal Poly Pomona applies HyperWorks to optimize the design of a new wheel shell and analyze laminates for a SAE Formula student racecar.

Video Testimonials

Adam Wais of Rolo Bikes Discusses the Working Relationship with Altair

During the development of a new carbon fiber bicycle, the design team at Sweden based Rolo Bikes, wanted to develop a frame which exhibited world leading strength and stiffness attributes while keeping weight to an absolute minimum. The team requi...

Customer Stories, Video Testimonials, Videos

CEVT Discuss Multi-Disciplinary Optimization for Vehicle Development

China Euro Vehicle Technology (CEVT) discuss the application of Multi-disciplinary Optimization (MDO) during the development of new automotive vehicle architectures.

Customer Stories, Video Testimonials

Digital Development at Hyundai Motor Group

Dr. Byungsik Kang is explaining how upfront engineering with FEA methods made a big impact at Hyundai Motor Group. He also explains the importance of designers using simulation for their own need at the early stage of development. Last but not lea...

Video Testimonials

Tokyo Institute of Technology

Tokyo Institute of Technology discusses the benefits of using PBS Professional.

Video Testimonials

Wayne State University

Wayne State University discusses their use of PBS Professional.

Video Testimonials

University of Tsukuba

Dr. Taisuke Boku, Deputy Director of University of Tsukuba, discusses how PBS Professional has helped manage the university's supercomputer business.

Video Testimonials

City University of New York (CUNY)

Listen to the City University of New York talk about their success using Altair’s PBS Professional for HPC workload management.

Video Testimonials

Centre for High Performance Computing (CHPC)

Hear how the Centre for HPC in South Africa is using PBS Professional and PBS Analytics to simplify HPC for their users.

Video Testimonials, Videos

Weizmann Institute

Watch this interview to see why Weizmann Institute switched to PBS Professional and Altair for HPC workload management.

Video Testimonials

Imperial College London

Watch this interview to see how Imperial College London benefits from using PBS Professional for cluster workload management.

Video Testimonials

Anadolu Isuzu Increases Truck Safety with HyperWorks Products

Safety Engineer Caner Kara is talking about their usage of Altair products in the design process of trucks and buses at Anadolu Isuzu.

Customer Stories, Video Testimonials

Luxon Engineering Applies Optimization-driven Design to Motocross Components

The motorcycles used in motocross racing demand light weight and high strength components in order to gain a performance advantage over the competition. In this video testimonial Billy Wight, President of Luxon Engineering, presents a case study o...

Customer Stories, Video Testimonials

DeWalt Optimizes Power Tools with HyperWorks

The development of modern electric power tools requires special attention to be simultaneously paid to both the efficiency and user comfort of the tool, as well as the robustness and durability of the devices. For the fulfillment of these two grou...

Customer Stories, Video Testimonials

Kirchhoff Automotive

Hear how Kirchhoff Automotive improves resource utilization with the PBS Works suite of HPC solutions.

Video Testimonials

Customer Story: Peter Macapia

Dr. Peter Macapia discusses solidThinking's part in reinventing structural systems and rethinking what a building is.

Customer Stories, Video Testimonials
40 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!